SONOTEC數字指示器和校準器種類及功能
SONOTEC數字指示器和校準器
數字指示器，SENSORMASTER和TRANS CAL
數字指示器接收來自稱重傳感器的測量信號，并將它們轉換成在顯示器上顯示。根據功能范圍的不同，這些儀器已經可以幫助您分析測量信號，并且可以將評估的測量數據傳輸到更別的控制環境。顯示屏上的極限設置和視覺報警是處理傳感器信號的便利功能。便攜式指示器和校準器為您直接在您的生產環境中執行自己的設備測試和校準提供了一種直接的方式，而無需長時間的停產。
SENSORMASTER 9163
使用應變式傳感器進行力，壓力或扭矩測量
用電位計或DC / DC傳感器進行距離或角度測量
0.1％的測量精度和傳感器特定的線性化
數學函數的范圍（例如差分測量）
OK / NOK反饋在多色顯示器上，并通過4個報警限制輸出
高采樣率（500次/秒）
9163數字指示器涵蓋了需要測量，顯示，分析和傳輸到更別控制系統的過程值的各種應用。
TRANS CAL 7281便攜式高精度校準器和用于機械和電氣測量的測試設備
兼容的傳感器：應變計/歸一化信號±5 V，±10 V，電位傳感器
設備測試：高達±50 mV / V的應變儀模擬器
通過Burster TEDS輕松配置
出色的線性度，誤差僅為±0.001％
zui多可存儲16個測量程序
數據記錄儀可存儲多達30,000個測量值
DAkkS /工廠校準證書可用于儀器或整個測量鏈，包括8527參考傳感器（可選）
多用途7281 TRANS CAL測試設備可用于需要執行高精度，現場校準用于壓力機，扭矩工具或壓力調節系統等設備的傳感元件的場合。
SONOTEC數字指示器和校準器種類及功能

DIGITAL INDICATORS AND CALIBRATORS

DIGITAL INDICATORS, SENSORMASTER AND TRANS CAL

Digital indicators receive the measurement signals from their load cells and convert them for presentingon a display. Depending on their range of functions, these instruments already help you to analyse your measurement signals and can transfer the evaluated measurement data to the higher-level control environment. Limit-setting and visual alarms on the display are convenient features for handling sensor signals. Portable indicators and calibrators provide a straightforward means for you to perform your own device testing and calibration directly in your production environment without lengthy production downtimes.

SENSORMASTER 9163

• For force, pressure or torque measurements using strain gage sensors
• For distance or angle measurements with potentiometric or DC/DC sensors
• Measurement accuracy of 0.1 % and sensor-specific linearization
• Range of mathematical functions (e.g. differential measurement)
• OK/NOK feedback on multicolour display and via 4 alarm limit outputs
• High sampling rate (500/sec.)

The 9163 digital indicator covers a wide range of applications in which process values need to be measured, displayed, analysed and transferred to higher-level control systems.

TRANS CAL 7281 portable high-precision calibrator and testing device for mechanical and electrical measurements

• Compatible sensors: Strain-gage/normalized signal ±5 V, ±10 V, potentiometric sensors
• Equipment test: strain-gauge simulator up to ±50 mV/V
• Easy configuration by burster TEDS
• Excellent linearity with an error of just ±0.001 %
• Storage of up to 16 measurement programs
• Data-logger for up to 30.000 measured values
• DAkkS/factory calibration certificate available for the instrument or the entire measurement chain including 8527 reference sensor (optional)

The multipurpose 7281 TRANS CAL testing device can be used wherever there is a need to perform highprecision, in-situ calibrations of sensing components used in equipment such as presses, torque tools or pressureregulating systems.

SONOTEC數字指示器和校準器種類及功能